Durafly GOBLIN Unboxing Assembly

Get one here at HobbyKing!: Blue: https://bit.ly/2YRALps Yellow: https://bit.ly/2NK0I3M Or on Amazon: https://amzn.to/3guw8rK Radio I use: https://amzn.to/2ykFXUF Battery I use: https://bit.ly/2YnDk0Q Stand I used: https://crewzinn.com/ Camera used: https://amzn.to/2GQCW2H My Amazon store: https://www.amazon.com/shop/johnvhrc Amazon links are affiliate links, free for you to use, but give me a tiny commission off the sale, to help fund my channel! Thank you! Thanks GBLynden for recording my flights! Check out his YT channel! Link to manual: https://cdn-global-hk.hobbyking.com/m... NOTE*please check before you take your first flight, I added a couple ounces of weight to the nose of mine for it to balance with the battery I used in the video. '1) At the top of the fuselage, check that the gap between the spinner backplate and the fuselage is approx 4mm . If it is not, you will need to add a washer behind the top '+' motor mount. This is to ensure the correct amount of down thrust. See the reference attached here. 2) It is recommended to reinforce the elevator hinge line with tape. 3) balance the prop (and ideally spinner) before flying 4) Check that the motor mounting screws are tight.' 5) replace the ball links for the supplied clevises 6) confirm the model is correctly balanced on the CG.