BearingShopUK - Splitting a Chain with a Chain Breaker

Here is a short video on splitting chain with a chain breaker. This is useful if you need to remove a link from a stretched chain. • First you will need a chain breaker and something to mark the chain • Chain breaker 10101 will break ¼" to ¾" pitch chain and 10102 will break ¾ • Fully unwind the handle to bring the pin up from breakers jaws • Mark the pins or plate where you need to break the chain • Clamp the breaker jaws over the chain so that the breaker pin lines up with the chain rivet • Tighten the chain breaker to push the rivet through the top chain plate • It is normally best to apply a bit pressure to each rivet alternatively • Applying too much pressure to one rivet can bend the link and damage the chain • Once both rivets have been pushed through the plate, the link should slide out from the chain • Some rivets can be tight and may need a tap with a hammer and a punch Bearing Shop UK offers both Chain Splitter 10101 and Chain Splitter 10102. For more details and questions, you may contact Bearing Shop UK at +44 843 289 4606 or e-mail us at [email protected]. We are located at Unit 13 Neptune Close, Medway City Ind. Est, Rochester, ME2 4LT. BearingShop is part of a large bearing distribution company that has been trading for the past 20 years. We strive to provide an excellent service to all our customers no matter how big or small. Source: http://www.bearingshopuk.co.uk/chain-... http://www.bearingshopuk.co.uk/chain-...