[30] B&D Roller Door Remote Erase & Recoding. Clearing the memory and reprogramming

B&D Power Drive & Roll-A-Pro® Rolling Door Opener. Remote Instructions Erasing All Programmed Codes: If the CODE SET button is pressed and held for six (8) seconds whilst the power is turned on the LED’s will blink rapidly for a few seconds to indicate that all programmed codes have been erased. Coding a Transmitter: Storing the Transmitter Code The opener can only be operated from remote control transmitters that have been programmed into its memory. Up to 64 codes can be stored in the memory. Press the CODE SET button and release. The CODE SET LED will illuminate to indicate the opener is in Code Learn mode. If a valid code is not stored within 15 seconds the opener will exit Code Learn. Press the transmitter button of your choice. The CODE SET LED will flash. Press the same transmitter button again. The CODE SET LED will illuminate for one second then go out. The transmitter button is now coded - press to test.