Raw Water Pump Replacement : Perkins 4108

Fitting a brand new raw water pump to a Perkins 4108 marine engine. My old raw water pump was leaking out the back of the housing. I replaced the impeller, but ruined a seal in the process, and I didn't know how to fix it, so I replaced the pump completely. I used a 7/8th spanner. I used this impeller pump : https://www.parts4engines.com/perkins... #impeller #perkins #perkins4108 #rawWaterPump #impellerPump #jabsco 00:00 Fitting a brand new raw water pump to a Perkins 4108 marine engine 00:10 Close the raw water seacock valve 00:20 Inspect the impeller 00:55 Removing the water hoses 01:05 Remove the pump from adapter plate 03:30 Looking at the brand new water pump and hose tails 04:50 Discuss new gasket and alignment tool 05:10 Remove temporary plugs and inspect new impeller is covered in glycerine 05:40 Put on gasket 05:55 Fit the new raw water pump 06:45 Put on new hose tails 07:28 Hoses back on 07:43 Open raw water seacock valve 07:54 Start engine and check water pumping out of exhaust