2006 Suzuki Grand Vitara 2.7 V6- Valve cover gaskets

This is definitely not a 'how to' video, more like a 'hOw I duNiT'. No narration is needed. The most important thing is the order of operations since a lot has to be removed to get to the actual gaskets. This particular job took me in total about 20 hours spread out over 2 weeks. There just wasn't a whole lot of good, clear, concise instruction available for this particular job. I hope this video helps anyone wanting to DIY. I believe this is the H27A V6 engine found in the 2006-08 Suzuki Grand Vitara models. The valve covers had been leaking for a while now, but only recently it started affecting the alternator. Oil was getting into the alternator and causing intermittent charging issues so I could no longer put it off. Costs: -EGR Valve - $35 -FEL-PRO MS 97028-1 Intake Manifold Gasket Set - $39 -Standard Motor Products PCV Valve - V428 - $32 -Air Intake Hose Tube [fits DOHC, 6Cyl 2.7L - $17 -GB Remanufacturing 8-024A Fuel Injector Seal Kit x6 -$24 -Pentius PAB10286 UltraFLOW Air Filter for Suzuki Grand Vitara (06-08) -$17 -NGK 3764 Iridium Spark Plug BKR6EIX-11 x 6 -$44 -FEL-PRO VS 50744 R Valve Cover Gasket Set -$25 -Silicone Vacuum Tubing Hose line Kit -$26 Total cost ~$260 Time: Roughly 20 hours (because I was disorganized and didn't know what I was doing) Leave a comment if you have any questions and I will answer as soon as I can.