Як налаштувати випередження тиску (PA) у 3D-принтері? Кроки калібрування у слайсері ORCA | 3D Farmer

https://addithub.com — don't look for performers in chats. Need a 3D print, model, prototype or technical solution? Post a task — get offers. Do you know how to print, model or do it by hand? Come to ADDITHUB and pick up your orders. ADDITHUB — tasks for those who know how to do. In this video, I will tell you in detail how to properly set up the pressure advance (PA) for your 3D printer using the ORCA slicer. You will learn: Why pressure advance is so important for print quality. How to properly prepare the printer for calibration. What calibration methods exist and how to use them. How to interpret test results for perfect setup. 🔧 This video will be useful for both beginners and experienced users of 3D printers. Subscribe to the channel to get more useful tips on 3D printing in Ukrainian! Where to enter the obtained value in the slicer? Only channel sponsors will know this secret info! You can download ORCA Slicer here - https://orca-slicer.com/#download If you have any questions, you can discuss them here - https://t.me/+EYQyNIsCoakwNTQy 00:00 - Introduction. What the video will be about. 01:00 - What is pressure advance (PA) and why is it needed. 02:30 - What you need to do before starting calibration (preparing the slicer, drying the plastic, cleaning the hotend). 05:00 - How to start the calibration process in the ORCA slicer. 07:30 - Overview of calibration methods: PA Line, PA Tower, PA Pattern. 10:00 - Interpretation of the results of each method. 15:00 - Calibration results and recommendations. 16:30 - When to recalibrate. 18:00 - Call to action: subscribe, like, share. Become a sponsor of this channel to receive bonuses:    / @3dfarmer_ua