Staining Cornhole Boards: Easy and simple process.

Using a simple setup and a little bit of time you can get the finish you want on your cornhole boards. In this simple video I'll walk you through the steps necessary and explain the different materials you will need to complete the job. It is very easy to do. We work hard to grow our channel and would appreciate you subscribing. Our Steps 1. Select top quality boards to finish 2. Lightly sand the boards with 150 grit, not too much. 3. Remove the sanding dust 3a. Apply pre-stain conditioner if you are staining Pine 4. Apply your stain using a foam brush in nice even strokes. 5. Allow to dry (don't rush it) 6. Lightly sand again with the same grit as step 2 7. Remove sawdust 8. Apply 2nd coat of stain with the foam brush as before. 9. Let it dry and lightly sand 10. Apply your polyurethane top coat, add 3 or more coats sanding lightly in between each coat. Items we used in this video that may be helpful for you. Pre-Stain Conditioner https://amzn.to/36kV41Y 2" Foam Brushes https://amzn.to/3mpm3PD Varathane Stain https://amzn.to/3mlWzmo DIY Finish Cornhole Boards https://bit.ly/3lnNnN1 Varathane Gel Stain https://amzn.to/3nV8Tux #cornhole #stain #staining *A couple of these link are amazon affiliate links*