Royal Alloy Steering Head Bearings - A FIX for stiff steering
This video will show how to grease the steering Head bearings, top and bottom, but there is enough information to show how to change the steering head bearings if needed. My 2020 GP300 scooter had developed stiff steering but it wasn't notchy, so I was confident the Head Bearings were fine, they just needed regreasing. Includes … removing the Glovebox removing the horn cast removing the speedometer removing the headset removing the headlight 00:00 - Start 00:13 - Intro 00:46 - Jack the Front Up 02:21 - Glovebox removal 03:01 - Horncast Removal 04:37 - The Bearings 05:23 - Removing the Head Unit 06:39 - Unplug Wires 07:23 - Remove Headlight 07:59 - Slacken Bearing Nut and Collar 09:20 - Remove Headstock Bolt 11:27 - Remove Headset 12:08 - Remove Top Bearing Locknuts 12:42 - Headstock Bolt and Brass Collet 12:51 - Marker 15 13:18 - Grease Top Bearing 13:35 - Freeing off the Top Bearing 14:18 - Freeing off the Bottom Bearing 15:22 - All Greased Up! 15:41 - Lowering the Forks 16:26 - Headset back on 16:48 - Reversal Procedure 18:02 - Collar tight 18:24 - Tighten locking Nut 18:55 - Headstock Bolt Back in 19:50 - Fit Headlamp next 21:32 - Headstock Cover on 21:57 - Outro 22:57 - The END DISCLAIMER I am not a professional and as such will not be responsible for property damage or injury incurred as a result of any of the information contained in these videos. They are to give information only and carried out with the best of my limited ability. Also, information given in these videos does not guarantee the desired outcome. Always refer to the vehicle handbook and/or service manual for specific settings and procedures for your own vehicle. This video only contains tips and recommendations that could be helpful when carrying out repairs or replacing parts. I am not liable for any harm, injury or property damage incurred while carrying out repairs or replacements, that are a result of incorrect use or misinterpretation of the provided information. This video is for informational purposes only and does not guarantee achievement of a specific result. The user is personally liable for incorrect use of repair equipment, tools or car parts, in particular, when this use poses the risk of injury.

VESPA changing steering head bearing 🛵🔧 | TUTORIAL | SIP

HOW TO Adjust steering head bearings

Royal Alloy Oil and Filter Change. The quickest way to do an Oil Change!

Steering head bearings: how to replace and adjust without special tools

Tasso Works - Dr Pulley Rollers fitted to a Royal Alloy GP350

2020 Royal Alloy GP300 review - After 6 Months and 1000 Miles

Replacing Scooter & Moped Steering Bearing And Races And Cutting Fork Springs To Stiffen Them

How To Replace Motorcycle Steering Bearings Without Special Tools

HOW TO: Install STEERING BEARINGS on your YAMAHA BWS 100cc

Royal Alloy Headstock bearing issues

Part 1 Adam from Tasso Works did my GP300 Upgrade kit - Air Filter Sock and Re-Map

Royal Alloy Scooter Accessories Available at Scooterwest.com!

How to Replace Steering Stem Bearings Motorcycle

Royal Alloy VCR Lowering Kit fitting and review ride out

Gotcha! | Motorcycle Headstock Bearing Race Removal!

How To Check And Adjust Your Motorcycle Steering Head Bearings | MC GARAGE

Royal Alloy removing the GP horncast

Ultimate #lambretta rustoration, Front hub rebuild.

Scooter Maintenance is 'DIFFICULT & EXPENSIVE'

