Hayward Phoenix Tips and Troubleshooting

The Hayward Phoenix is a Leslie’s Retail only cleaner and is available at your local Leslie’s store. It is in the same Hayward family of cleaners as the Poolcleaner and Aquanaut and note that these parts are the same ones for all three cleaners. The Hayward Phoenix is a solid cleaner but it will wear out over time just like any other product.💕 The one part you will need to change more often than any other is the rubber tires. Depending on how long you run your pool and the pool surface type will determine the tire lifespan. Generally speaking, you should get at least 15 months to 18 months out of each set of tires. For best performance, once the wear mark is reached I suggest changing the tires. For the four-wheel version, I like taking the front tires when worn and just cutting the hump off. Then I put them on the back tires, thus saving $50.00. I then put a new set of tires on the front. The best thing about this cleaner is that Hayward sells what they call the Lower Body Conversion Kit – which is basically the entire bottom with the gears and driveshaft, plus 2 new wheels. For $120 or so you can have technically a brand new cleaner in 10 minutes. To learn more about the lower body conversion kit you can watch this video:    • Hayward Poolvergnuegen Lower Body Conversi...   To order parts for the Phoenix you can stop by your local Leslie’s or shop online here: https://lesliespool.com/phoenix-2x-su... Another issue that you may run into is that large debris will jam the cleaner. A good way to solve this problem is to remove one or two vanes from the V-Flex turbine. It will still function fine and with the vanes removed larger debris will pass thru. Also in some cases, a small pebble will get under a vane and lift it up causing it to get jammed. Simply remove the vanes and clear out any pebbles. The wall-climbing ability is dependent on the pool pump size and flow. Basically, if you have poor flow the cleaner will only climb the walls to the coves or partial walls. If you have a powerful pump (1.5 to 2.0 hp) and good flow, by inserting the large suction inlet the cleaner will generally climb to the water line in a plaster and PebbleTec pool. Note that for a Tile or Vinyl pool the wall-climbing ability will be less. There is always the question of getting the 2-wheel or 4-wheel model. If your pool is more than 8 feet deep get the 4-wheel model. Also, if your pool is large and the skimmer is on the far end, go with the 4-wheel model as it comes with two extra one-meter hose lengths. For a small or medium pool, I suggest the 2-wheel model. I also suggest a 2-wheel model for a large pool with a side port, vacuum port in the middle. But when in doubt, go with the 4-wheel model. Visit my Website: http://www.swimmingpoollearning.com/ eBook: https://www.swimmingpoollearning.com/... YouTube Video Index: http://poolmandave.blogspot.com/2014/... – A list of all of my videos. Blogger: http://poolmandave.blogspot.com/ Facebook:   / swimmingpoollearning   Twitter:   / mrdgvb1   Join me on Patreon:   / poolguycoaching   Podcast: http://www.buzzsprout.com/110832 Podcast Website: https://www.thepoolguypodcastshow.com/ Coaching Site: https://poolguycoaching.com/ Shop at Leslie's: Leslie’s Pool Supplies has been do-it-yourselfers and pool trade professionals trusted partner since 1963, providing quality products and services to make pool care easy and solutions and expertise to do it right. http://lesliespool.com/? utm_medium=referral&utm_source=spll&utm_campaign=spll