BDT: Fuel-it Ethanol Sensor Install

How's it going everyone?! Happy Friday, hopefully we are one week closer to ending this quarantine! The other day I decided to install my Fuel-it: Ethanol Sensor. I'll need this to accurately gage my fuel mixture, once I upgrade to the e40 blend. It was a pretty simple install, and I'm happy with how it all turned out. Now I just have to start cooking up the BDT Sauce called that Stage 3 e40 blend. 😜💪🏻 Thanks for watching, and as always comment down below if you have any questions! #StayInandStaySafe _______________________________________________________________________________ This Tutorial is provided as a courtesy by Boost Dynamic Tuning Proper service and repair procedures are vital to the safe, reliable operation of all motor vehicles as well as the personal safety of those performing the repairs. Standard safety procedures and precautions (Including use of safety goggles and proper tools and equipment) should be followed at all times to eliminate the possibility of personal injury or improper service which could damage the vehicle or compromise safety. Although this material has been prepared with the intent to provide reliable information, no warranty (Express or implied) is made as to its accuracy or completeness. Neither is any liability assumed for loss or damage resulting from reliance on this material. SPECIFICALLY, NO WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER WARRANTY IS MADE OR TO BE IMPLIED WITH RESPECT TO THIS MATERIAL. In no event will Boost Dynamic Tuning, LLC or its affiliates be liable for any damages, direct or indirect, consequential or compensatory, arising out of the use of this material.