How To Change Spark Plugs for 2013-2016 Ford Escape: HOW TO ESCAPE

In this video, we're focusing on changing spark plugs for a 1.6L EcoBoost Ford Escape. We will change 4 spark plugs with the Motorcraft recommended plugs. You will see the noted materials and tools needed. Thread grease for the plugs is OPTIONAL as stated by my dealer. NOTE: When using a deep socket to remove a spark plug, make sure you have the thinnest walled socket possible. If it's too thick, it will bind in your spark plug well and feel awful like you're cross threading... I know because I did it. Please let me know if you have any questions and or suggestions. Post in the comments- LIKE, SHARE, and SUBSCRIBE if you found this helpful! Thanks! 0:00 Introduction 0:09 Featuring '13-'15 FORD Escapes 2:35 Remove engine cover. 2:58 Disconnect coil wire conectors. 3:22 Remove 8nam bolts and store in a safe place 4:13 User16mm thin walled deep socket to 5:59 Blow air into cylinder to clear debris again 6:07 Install new spark plug with grabber tool 6:19 STEP 1: Tighten plug with 16mm thin walled deep socket 6:57 Lightly coat bottom lip of coil with dielectric grease. 7:37 Reinstall coil 7:48 Reinstall 8mm bolts. 8:15 Repeat STEPS 2-15 for each remaining spark plug 8:38 Reinstall engine cover and