Ремонт вентилятора видеокарты Gigabyte 75 мм за 15 рублей

The video shows the process of replacing and lubricating the sleeve bearings in the electric motors used by Gigabyte in various series of video cards. Specifically, following the instructions, I replaced the PLD08010S12HH bearing in the Gigabyte GTX 1080ti cooler's 75mm diameter motor. This is certainly more complicated than simply replacing the entire cooling fan assembly, but it's also tens of times cheaper. For example, repairing three broken fans by replacing the Gigabyte cooler bearing on the aforementioned Gigabyte Ti cost 45 rubles. Buying three coolers on AliExpress would have cost over 800 rubles. The bushings themselves are of more or less the same quality as the original, although there are nuances in their height depending on the motor models used. The ones shown in the video are universal and fit most 75mm fans on Gigabyte 900 (nine hundredth) and 1000 (thousandth) series video cards. They should be replaced when a noticeable extraneous noise appears from the video card, the cooler starts to hum, grinding against the case, then stops completely, and the card starts to overheat. Lubricant is expensive and excessive - https://alii.pub/76impz?erid=2SDnjcoTbQx Lubricant is cheaper and less expensive - http://ali.pub/4wywg9 Smooth bushing 2x5x4.2 - http://ali.pub/4wyw04 Kerbed bushing - http://ali.pub/4wyw5r Advertising: OOO "ALIBABA.COM (RU)" INN: 7703380158