Traxxas Maxx V2 Fixing Axle Shafts (CV Shaft) *How To*

This is a Step by Step, How to video on changing the axle shaft/cv shafts on a traxxas maxx V2. (Exact same on V1) Step by Step List : 1. Pry the wheel hex off and remove the pin. 2. Take out the 2mm screw in the tie rod end. 3. take out the top and bottom 2.5mm Wheel Hub screws. 4. Pull outer shaft and hub out of a arm. 5. Remove Bumper and skid plate. 6. Remove 2.5mm screw In end of bulkhead. 7. Remove plastic and steel plate on arm hinge pins. 8. Pull lower a arm out, leave hanging. 9. Remove 2mm screw in inner shaft - output stub. 10. put new inner shaft and screw in 11. REASSEMBLE OUTER SHAFT - 12. Pull outer shaft out of hub. 13. Put new shaft in (make sure bearings are in hub). 14. line up marks slide outer shaft on 15. REASSEMBLE ** Axle Shaft ( CV Shaft ) [Widemaxx] - https://www.amainhobbies.com/traxxas-... ** Traxxas Maxx V2 - https://www.amainhobbies.com/traxxas-... ** Traxxas 6700MAH 4cell lipo - https://www.amainhobbies.com/traxxas-... ** 80WT Shock oil - https://www.amainhobbies.com/team-ass... ** 1 Million WT Diff oil - https://www.amainhobbies.com/team-ass... Thank you for watching , leave me a comment and Subscribe for more    / @wastedwages402