How to Replace EGR Valve 1998-2011 Ford Ranger 3.0L V6

Shop for New Auto Parts at 1AAuto.com https://trq.video/c-86-5 This video shows you how to install an EGR valve on your 1998-2011 Ford Ranger 3.0L V6. The EGR valve helps to reduce pollution by directing some exhaust gas back through the combustion chambers. If the valve is stuck the system won't work correctly, and if it leaks the engine might stall or not start at all. This repair was done on a 2001 Ford Ranger XLT 3.0L Extended Cab Pickup 2-Door 4WD Automatic and the process should be similar on the following vehicles: 1998 Ford Ranger 1999 Ford Ranger 2000 Ford Ranger 2001 Ford Ranger 2002 Ford Ranger 2003 Ford Ranger 2004 Ford Ranger 2005 Ford Ranger 2006 Ford Ranger 2007 Ford Ranger 2008 Ford Ranger 2009 Ford Ranger 2010 Ford Ranger 2011 Ford Ranger Tools you will need: • 10mm Socket • Ratchet • Torque Wrench https://trq.video/obNI-1AXAA00044 • 1-1/16 Inch Wrench • Gloves https://trq.video/occV-1AXSS00048 • Rust Penetrant • Safety Glasses • Razor Blade / Gasket Scraper • Wheel Chocks Subscribe:    / @trq   Check out our playlist: Ford Ranger 1998-2011 3rd Generation:    • Ford Ranger 1998-2011 3rd Generation   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.