Honda Bros twin step by step Rear head and cylinder removal in the frame Part 1
Due to loss of compression on the rear cylinder I am forced to remove the head and investigate. The initial compression test came up with 25psi on the rear cylinder, and leak down test showed issues with the intake valves. The procedure would be similar for most Honda Vtwins like Hawk, NTV, Deauville etc. Videos are made in good faith and are not intended as professional advice. If you undertake any tasks from the videos, you are doing it at your own risk and your own liability. Thanks for watching.
▶︎
Honda Bros how to measure the piston using a micrometer
▶︎
Honda Bros Rear head and cylinder rebuild Part 2
▶︎
IDIOTS AT WORK Mechanic Edition | Part 2
▶︎
Restore 20 years old forgotten honda @ 150i car engine | Restoration of Honda @ 150i Italia Old 2001
▶︎
Restoring the 1994 Honda CB400 Motorcycle – Bringing the Dream Bike Back to Life.
▶︎
Nothing about the honey badger is normal... and here is why
▶︎
I BOUGHT A NON RUNNING DUCATI 996...WILL IT START?
▶︎
Unbelievable Smart Worker & Hilarious Fails | Construction Compilation #7 #adamrose #smartworkers
▶︎
I Bought THE Turbo Diesel Powered John Deere Motorcycle
▶︎
Honda Bros Snapped camshaft post mortem
▶︎
Why Are Japanese Motorcycles So Hard to Beat?
▶︎
Unbelievable Smart Worker & Hilarious Fails | Construction Compilation #8 #adamrose #smartworkers
▶︎
How to Add Almost 3X the HP on a Single Cylinder Engine
▶︎
5 YEARS ABANDONED…..Will It Run? - 2005 Honda Fireblade CBR1000RR
▶︎
Honda Bros Splitting the engine casing on a V-Twin
▶︎
13 Motorcycle Engines That Were Too Powerful for Their Time
▶︎
Honda Bros Snapped Camshaft
▶︎
The Forgotten Superbike That Defied Every Rule
▶︎
The Real Reason Half The World's Bikes Don't Use Liquid Cooling
▶︎