🔧 2017-2021 Toyota Sienna Transmission Fluid Change, how to check trans temperature. UA80E

The Sienna featured in this video is a 2017. This procedure should be the same for all 2017-2021 Sienna's with the UA80E transmission. This video covers the Toyota recommended fluid drain and refill service only, however, if you feel the need to change the filter here is a link for that: Filter and pan gasket: (2017-2020) https://amzn.to/42LxpEN Fill plug: 24mm, 29 ft-lbs (39Nm) Drain plug: 10mm hex, 15 ft-lbs (20Nm) Level check plug: 6MM hex (hand tight only) Crush washers: https://amzn.to/3SLYC5V Quinn 1/2" Drive Torque Wrench: https://www.harborfreight.com/12-in-d... Quinn 3/8" Drive Torque Wrench: https://www.harborfreight.com/38-in-d... 1 gallon of Valvoline MaxLife ATF: https://amzn.to/3vL6isv or Toyota WS Fluid: https://amzn.to/46brxUA Hand pump: https://amzn.to/3XDmUi4 These are both the same scanner: Innova 5610: https://amzn.to/3ZFN3hc Zurich ZR15s: https://www.harborfreight.com/zr15s-o... Target temp: 95F-113F (35C-45C) 0:00 objective 0:14 tools you'll need 2:15 What's the deal with the fluid type? 4:13 removing the wheel 4:30 removing the access panel 5:03 loosening the fill plug 5:52 removing the drain plug and fill level tube, draining the fluid 7:50 reinstalling the fill level tube and drain plug 9:05 refilling the transmission 10:16 installing the fill plug 11:05 reinstalling the access panel 12:16 accessing transmission temp with scanner 13:08 reinstalling the wheel 13:40 removing drain plug to set level 14:40 reinstalling the drain plug 15:22 torquing down the lug nuts As an Amazon Associate, I earn from qualifying purchases. For your convenience, I try to post links to everything I use in the video description. That's part of how I cover the costs of this channel. I appreciate your support buy using these links!!