How to Change a Profile in an NTM SSQ II™ MultiPro Roof Panel Machine

How do you change profile dies/profile tooling in an NTM SSQ II™ MultiPro portable roof panel machine effectively and safely? ********************************** The SSQ II™ MultiPro roof panel machine has 15 available profiles that be changed by one person in 45 minutes or less. In this video, Bryan Yancy from the New Tech Machinery service department demonstrates each step of the profile changeover procedure, going from the SS150 mechanical seam panel to the SS450 snap-lock panel. If by chance we didn't answer your question in this video, you can contact us here: https://hubs.ly/H0f817Z0 Always reference your machine user manual for detailed information. Download a digital copy of your manual here: https://newtechmachinery.com/learning... ********************************** FOLLOW THE NEW TECH MACHINERY TEAM ►  / new-tech-machinery   ►  / ntmmazzella   Visit Our Website: https://hubs.ly/H0f82Sn0 Subscribe To Our Blog: https://hubs.ly/H0f82T00 Machine should never be operated without the guards in place. Otherwise severe injury can occur. Machine must be operated by a competent trained individual and never be operated by a person who has not had proper training, studied the video and the latest operating manual found at www.newtechmachinery.com/resources/machine-manuals. Failure to operate correctly or without guards can result in severe injury. New Tech Machinery provides no warranty (finish, substrate or weather tight) in relation to the metal roofing systems the machines form. Should a warranty be required, users should consult with the metal roof manufacturer or coil supplier prior to contracting on work. It is the sole responsibility of the installer and/or metal panel manufacturer to ensure that the roof system meets all engineering and local building codes.