Switch V1/V2 Picofly Easy Guide 2026

Unlock the full Picofly experience with this complete, step-by-step Nintendo Switch V1 & V2 installation guide — updated for 2026. This is the most detailed walkthrough I’ve ever made, covering every stage of the process from opening the console to reinstalling the final screw. Whether you're modding a V1 Switch, V2 (Mariko), or just want to understand which Picofly version to use, this guide breaks everything down clearly, safely, and in the correct order. I also include measurements, tips, pro-level troubleshooting steps, and a few tricks that will massively improve your success rate. 💥 PLUS: Switch OLED Giveaway! Watch the full video for details on how to enter. 🔧 What This Guide Covers ✔️ Picofly V1 vs V2 — which one you should actually be using ✔️ Safe disassembly steps for the Switch V1/V2 ✔️ CPU cap measurements & proper soldering technique ✔️ EMMC removal, prep, and reinstall ✔️ Shield modification and reinstallation ✔️ High-success-rate install method ✔️ Pro tips to avoid common mistakes 🧰 Tools Needed ✔️ Multimeter ✔️ Fine soldering iron tip (set to 380°C) ✔️ Regular soldering iron tip ✔️ Kapton tape ✔️ Strong scissors ✔️ Thermal paste (recommended: Arctic MX-4) ✔️ Tri-wing screwdriver ✔️ Phillips #000 screwdriver ✔️ Plastic pry tools ✔️ Tweezers (one pair should be ceramic) 💬 Support the Channel If this guide helped you, consider subscribing, liking, or dropping a comment. It helps a lot and tells me to keep making improved Picofly and modding content! 📌 Chapters 00:00 Intro 00:30 Giveaway Switch OLED 01:52 Which Picofly version to use V1 02:40 Which Picofly version to use V2 04:15 Taking the Backplate off the Switch 07:30 Removing the RF shield 08:52 Cleaning up solder paste 09:54 Removing the heat sync 12:43 Removing and prepping the EMMC 14:06 Removing the CPU Shield 17:50 Checking the SD Card Reader (Pro Tip) 18:45 Soldering and measuring the CPU caps 29:42 Prepping CPU shield 32:41 Installing the EMMC and Picofly board 35:54 Reinstalling the HeatSync 38:45 Cutting the RF Shield 40:13 Reinstalling the RF shield 41:51 Reinstalling the back plate 44:32 Final test and outro _______________________________________ Stickers SlothGaming Source: https://www.ebay.co.uk/usr/slothgamin... _______________________________________ Affilate Links Filament : https://elegoo.sjv.io/APEOoo NYXI Wizard : https://nyxigame.com/products/1605826...