화장실 남자 소변기 세척밸브 고장났을때 수리방법!!

=Purchase Link= Urinal Flush Valve Piston: https://bit.ly/4bfZgj7 Urinal Push Button: https://bit.ly/4bighJu Men's Urinal... When you flush by pressing the button, the water should flow for a certain amount of time before stopping, but if it keeps flowing or if the button is leaking, let's learn how to fix it with a simple replacement! 00:00 Description of the problem with the urinal water not stopping. 00:14 How to turn the flow control valve to shut off the water supply. 00:40 How to disassemble the top lid and replace the internal piston. 01:29 Reopen the valve, check for normal operation after repair. 01:38 Instructions for fixing water leaking through the button. 02:00 Preparation of a new button part and demonstration of replacement using a monkey wrench. 02:44 Summary of the entire content and recommendations for inexpensive repairs through replacement parts. == Video Summary == Q: What should I do first when water keeps pouring from a urinal? A: You must first shut off the water by turning the linear flow control valve on top of the flush valve clockwise. Q: What are the most common causes and solutions for water not stopping? A: The "piston" component inside the valve is most likely broken. This can be easily resolved by opening the top cover and replacing the internal piston with a new one. Q: Where can I find the piston or button parts needed for repairs? A: You can easily purchase them online or at a local hardware store for around 3,000 to 5,000 won. Q: What should I do if water leaks between the buttons when I press them? A: Use a monkey wrench to loosen the button assembly by turning it counterclockwise, then replace it with a new button part. Q: Do I need to replace the entire valve? A: No. Anyone can easily repair the valve themselves without spending a lot of money by replacing only the piston or button parts shown in the video.