Measure Coatings on Concrete using the Elcometer 500 Coating Thickness Gauge

The Elcometer 500 Coating Thickness Gauge accurately measures the thickness of coatings on concrete non destructively, as well as other similar substrates*. Fast and accurate, the Elcometer 500 Concrete Coating Thickness Gauge takes repeatable and reproducible dry film thickness measurements of coatings on concrete up to 9mm‡ thick – without damaging the coating. The built in signal strength indicator on the Elcometer 500 Coatings on Concrete Gauge prevents false or incorrect readings, as the gauge only displays the coating thickness measurement if the signal strength indicator goes green. Taking over 60 readings per minute in standard mode and 140+ readings per minute in scan mode; the Elcometer 500 Coating Thickness Gauge allows users to inspect more coatings in less time. The Elcometer 500 Concrete Coating Thickness Gauge measurement probes are supplied with user replaceable probe tips. If the tip is damaged or wears during use you can replace it and carry on. The gauge even informs you when you need to change the probe tip, maximising inspection time. The Elcometer 500 Coating Thickness Gauge can also measure film thickness on substrates including plasterboard, drywall, concrete block, brick etc. without damaging the coating. The coating material library feature simplifies the coating inspection process; there is no need to set up gates, range values or known thickness of the coating. Just select the coating material from the gauge library and start measuring. Incorporating state of the art ultrasonic measurement technology, each gauge can be calibrated in one of three ways - to a known thickness of the coating to be inspected; by setting the speed of sound of the coating; or by selecting the coating from a list of generic, or user defined coating materials. Once the gauge has been calibrated, the Elcometer 500 Coating Thickness Gauge has a measurement accuracy of ±2%. Robust, ergonomic and sealed against dirt and water, equivalent to a rating of IP54, the Elcometer 500 Concrete Coating Thickness Gauge has been designed to work in harsh environments. Compatible with ElcoMaster® software and ElcoMaster® Mobile App, individual coating thickness measurements can be transferred via USB or Bluetooth® to PC or a mobile device for analysis and instant report generation. For more information on how to non-destructively measure coatings on concrete using the Elcometer 500 Coating Thickness Gauge, please contact Elcometer at [email protected] or visit our website: http://www.elcometer.com/en/coating-i... ----- Click here to download the video script in English: https://www.elcometer.com/pub/media/P... ----- STANDARDS: ASTM D6132, SSPC PA9, ISO 2808 Method 10 ----- Similar substrates include plasterboard, drywall, concrete block, brick etc. ‡ Epoxy coatings, thickness on other materials may vary