Часть 8. Пробую фрезеровать с невыставленным шпинделем. Первый пуск фрезерного полимергранитного
First run of the machine. Please don't judge too harshly; the spindle hasn't been adjusted yet, it's very crooked. The cutter overhang in the video is too long, which is a bad manufacturer. The cutter body is raw, as it turned out after the cut. But overall, I'm satisfied. The table material is 40x.
▶︎
Part 6. The mechanics of the polymer granite milling machine are ready!
▶︎
Немного о фрезерных станках. Их видах и моделях.
▶︎
CNC. Spindle with water or air cooling?
▶︎
My Next Masterpiece!!! I Built a Tool Post Milling Spindle
▶︎
テレスコカバーマシニングセンター用
▶︎
Bought a Broken CNC Lathe They Don’t Want Me to Fix
▶︎
Unbelievable Smart Worker & Hilarious Fails | Construction Compilation #18 #construction #adamrose
▶︎
Станок 600х400 + шпиндель ВТ30 + стойка Newker 1000MiCa
▶︎
Big mold part (cnc milling)
▶︎
I Bought a 10.000€ Metal Lathe and had to Repair it
▶︎
This xTool will disrupt everything.... VERY SERIOUSLY!
▶︎
Часть 7. Некоторые доработки фрезерного станка перед запуском
▶︎
Pushing a Budget CNC Router to Its Limits – Cutting Steel!
▶︎
Cutter CH + кабинет и оснастка
▶︎
Очередная работа.Кронштейн
▶︎
How To Setup an AC Servo in Velocity Mode as CNC Spindle in MACH3
▶︎
Incredible Process of 24k Pure Gold Extraction From Old PC RAM | How to Make Gold Into RAM
▶︎
Ultra-high performance gantry machining center LM-4228
▶︎
Обзор домашнего станочка и решений
▶︎