Making the ultimate mobile table and miter saw workbench (w/ subtitles)

Join my newsletter for exclusive content and project updates before videos are released: https://that-diy-life.ck.page/thatdiy... Today we upgrade the garage workbench from the ten year old Ikea office table with broken legs to a dedicated table saw and miter saw workbench. Here are some of the specs: 4x8 ft workbench 40" height. The workbench is shorter in the original plans but I made it a bit taller to account for my height Mounted on rolling casters for easy mobility Miter saw shelf can be removed and placed onto the table top for a larger out feed surface for the table saw if needed Dedicated table saw shelf 2x4s used for all of the construction 2 1/2" general construction screws used to join the 2x4s 1 1/4" screws used to join the MDF Kreg pocket screws used to hold join a few of the 2x4s. This build is mostly based on the plans from Bitterroot DIY: https://www.bitterrootdiy.com/diy-mob... If you'd like to support my channel feel free to checkout the tools in this video by clicking an Amazon affiliate link below. Makita brushless drill: https://amzn.to/48m68t5 Makita cordless jigsaw: https://amzn.to/47bn7Nv Ridgid corder miter saw: https://amzn.to/47pl2Oh Kreg pocket hole jig: https://amzn.to/3NQ65hr Kreg pocket hole screws: https://amzn.to/3S6p3m8 Jorgensen 6" clamps: https://amzn.to/3S2WFSa I made a few modifications to the original plans to account for my table and miter saw dimensions. Overall I'm pretty happy with how the project turned out. The only thing I would have done different is not using 2x4s to hold up the top piece of plywood. The bows in the 2x4s made the top slightly uneven. The total cost of materials not including tools was about $230. 0:00 bottom frame assembly 0:40 vertical supports 1:26 attaching casters 2:26 reducing vertical supports height 2:48 bottom shelf 3:46 top frame assembly 4:39 table saw shelf assembly 6:17 slider miter saw frame 6:39 workbench table top cutouts 7:47 fastening the table top 8:26 sanding 8:49 polyurethane finishing 9:09 test cuts