Building a Factory 5 Racing Roadster: Drive shaft, Heater and Radiator.

In this episode of The Roadster Experience, we'll take a crack at installing the drive shaft and drive shaft safety loop, along with the heater and radiator. We take a close look at installing the drive shaft, getting the drive shaft properly aligned and then getting the safety loop installed around the drive shaft. From there we will get the heater box installed and finish up with the radiator installation. 🔧 Key Steps Covered: Installing the driveshaft spacer. Installing and leveling the driveshaft. Cutting the firewall for the installation of the Vintage Air Heater Box. Installing the heater box. Wiring the heater box fan. Plumbing the heater box. Installing the Breeze Radiator Shroud. Installing the radiator. Building and installing a radiator lower support. Installing the radiator hoses Installing the radiator lower tube support Installing the radiator overflow tank. Cutting Stripping, and using solder butt joints to hook up the electrical system. Fabricating supports, silicone application, torque spec for each installed item. Key Links: AllStar Driveshaft Safety Loop https://www.amazon.com/dp/B003C01DZQ?... Throughout the video, I highlight lessons learned, including challenges routing wires and hoses. If you’re enjoying the series, be sure to like, subscribe, and hit the notification bell for more updates as we continue this build journey. Next up, we’ll dive into the heater box, drive shaft and drive shaft safety loop and the radiator! #FactoryFiveRacing#FactoryFiveRoadster #RoadsterExperience#Cobra#Shelby #DIYCarBuild #wire #wireharness #radiator #radiator support #radiator hose, #radiatorfan , #tools, #radiator fluid, #radiatoroverflowtank, #Vintageair, #vintageairheater #heater, #vent #wiring #switch #instrumentpanel #dashboard #grabbar#ohshitbar #driveshaft #driveshaftalignment #driveshaftspacer #driveshaftsafetyhoop #driveshaftsafetyloop