Cara Mengetahui CDI Honda Beat Karbu Yang Masih Hidup, Bagus, Atau Mati.

How to find out if the Honda Beat Karbu CDI is still alive or dead. The first step we have to check is the cable path that has the cdi socket pin, namely: 1. The green cable is a time line for the cdi, make sure it is connected to the motor body or frame. 2. The green wire and the white line are the CDI mass lines from the side standard, so when the standard is lifted up, the time is connected, and when the side standard is lowered, the CDI is not connected. 3. the red wire, the black line, is the current path for the 12 volt battery after the ignition is on, or if you don't use the ignition key, then we can directly connect it from the red wire kiprok directly to the red wire with the black line and make sure there is current. 4. the blue wire and the yellow line are the pulser lines and make sure there is a current. And for checking, we can use the LED lights in the gas lighter with the lights on. 5. The black yellow line is the output current from the CDI that goes to the coil and make sure there is a current. If there is no current then the CDI is dead on condition that we have checked all the components on the CDI socket pins. And also make sure the green wire in the coil is connected to the frame or motor body. Thank you very much to all #SUBSCRIBER# and viewers wherever you are, hopefully the knowledge is useful. Please #SUBSCRIBE AND LIKE# #IBOT MOTOR CHANNEL# If you have questions, you can write them in the comments. Tel/WA: 085863491419. Thank you very much.