Volvo Fuel Door Hinge Replacement - Super Simple DIY (S60, S80, V70, XC70, XC90)

►Shop the Parts used: https://hubs.ly/H0cMVXb0 SUBSCRIBE: https://hubs.ly/H0cDnfN0 If you own a P2 chassis Volvo, then chances are that you’re no stranger to the poor design of the fuel door hinge. The fuel door hinges on these cars are made of a cheap plastic which most commonly breaks off at the point where the spring applies pressure to the hinge. It's and easy repair, and all you need is a punch and a hammer. *NOTE:* Before installing, we recommend to remove the securing pins from the new hinge, flip them over, and reinsert halfway back into the new hinge. This will prevent the pins from dislodging and flying away when you go to tap them into the securing position. These plastic hinges were used on the following models & year ranges: S60 (2001-2009) V70 (2001-2007) XC70 (2003-2007) S80 (1999-2006) XC90 (2003-2014) Check out the Blog: https://hubs.ly/H0cMV5N0 Get free parts from FCP Euro: https://www.fcpeuro.com/page/lifetime... Follow FCP Euro on:   / fcpeuro     / fcpeuro     / fcpeuro   https://www.fcpeuro.com/