Ametek 5.7" Diameter Motor Rotating Fan and Brush Replacement | Kleen-Rite

Watch a technical sales engineer from Ametek service a standard 5.7" diameter motor. In this video, he changes a rotating fan and replaces the brushes. Use his expert knowledge as a helpful guide when working on your vacuum motor! Change Rotating Fan: 0:00 Introduction 0:10 Tools Used 0:47 Check That Power is Off and Remove Outer Fan Shell 1:16 Remove Nut, Washer, and Old Rotating Fan 1:50 Put on New Rotating Fan, Reapply Washer and Nut 2:19 Replace Outer Fan Shell Replace Brushes: 2:40 Remove Flat Brass Terminal 3:30 Remove Clamp 3:43 Take Out Old Brush and Replace with New Brush 4:14 Reinstall Brush Clamp 4:53 Heat Run the Brushes Shop all Ametek motors: https://www.kleen-ritecorp.com/c-1168... Shop Vacuum Motors and Replacement Parts: https://www.kleen-ritecorp.com/c-1170... Reach Kleen-Rite at 800-233-3873 or visit https://www.kleen-ritecorp.com!