Gas Dehydration System: Glycol Regeneration (TEG) [Glycol Pump, Reboiler, Contact Tower, BTEX]

A gas dehydration system is used by oil and gas producers to dehydrate natural gas into a state where it can be sold downstream in the oil and gas production process. In this video, Mark follows the pipes around a gas dehydration system and explains what each piece of equipment is doing to process the gas. 📕 Blog: https://kimray.com/training/gas-dehyd... 📩 Get Updates: https://kimray.com/subscribe 👨‍🏫 Training: https://kimray.com/services/training 🆘 Support: https://kimray.com/get-product-support ➡️ 1-405-525-4264 or [email protected] SOCIAL:   / kimrayinc     / kimray-inc   PODCAST: Apple: https://apple.co/3c82VQd Spotify: https://spoti.fi/2ZMCm0j TIMESTAMPS: 0:00 Introduction to the Process 0:21 Contactor Tower 2:21 Dehydration Unit 3:58 Lean "Dry" Glycol 4:35 Glycol Pump 5:49 Lean Glycol to Contactor Tower 6:02 Gas Dehydration 6:57 Wet "Rich" Glycol to Glycol Pump 7:20 Glycol-to-Glycol Heat Exchange System 8:03 Flash Separator 9:02 BTEX Elimination System 9:21 Conclusion & Other Video Recommendations From the gas dehydration system inlet, we look at the three-valve manifold on the contactor tower, as well as the trays, bubble caps and operation of the absorber. Looking at the reboiler skid, we identify the reboiler, surge tank, y-strainer, glycol pump and check valve. We follow the pipes as the rich, wet glycol and dry, lean glycol move through the system of heat exchangers, flash separator, still column and BTEX elimination system.