I use the TP-Link XZ000-G3 with a different ISP

You can "unlock" the XZ000-G3 and use it to replace the ONT provided by other ISP. In this video, I have replaced the iGate GW040-H (provided by VNPT) with the XZ000-G3 (provided by FPT) and set up a working internet connection. TL;DR I installed Gigabit fiber internet and the ISP is FPT. They provided the TP-Link XZ000-G3 which is working in bridge mode.    • I have installed Gigabit Fiber Internet ft...   I flashed an "unlocked" firmware on the XZ000-G3 and gain access to hidden configuration such as GPON Serial Number, Software/Hardware version.    • TP-Link XZ000-G3 Unlocked Firmware (Reveal...   I wanted to use the XZ000-G3 with my other ISP, which is VNPT. Therefore, I cloned the information of the VNPT's ONT (iGate GW040-H) to the XZ000-G3 and the GPON connection is successfully authenticated (O5). I monitor and see that both the PON & PPPoE connection is up and running for 5 days with no problem at all. Therefore, I decided to make this video and share the progress with you. Timelime: 00:00 - Intro 01:22 - Backup Original GPON configuration of the XZ000-G3 03:31 - The iGate GW040-H ONT (from a different ISP) 04:52 - Clone the GPON SN & GPON Password (Don't skip) 10:29 - Connect fiber cable from VPNT (a different ISP) to the XZ000-G3 11:24 - GPON O5 and VLAN scan 12:05 - PPPoE connection setup 14:17 - Stability of the XZ000-G3 with my new ISP How to repack the "unlocked" XZ000-G3 firmware - https://github.com/mobrembski/tprepack Thanks for watching and see you soon!