WLtoys 284131 / 284010 - Einfachster RWD Drift Umbau - Komplett und ohne 3D Druck

All Inclusive under 100EUR, almost only original parts. A complete guide for a really good working RWD drifter. I claim, there is no better introduction to the topic. (Almost) only parts from the car are used. Exceptions: Gyro, tires, servo (The original servo is really useless). Left: Gyro - AGFrc GY04m V3.5 -: https://tinyurl.com/t75dccz2 The version V3.0 has no AVCS mode yet and this is really a relief. Gyro - HGV4 - A bit more expensive, but should be top: https://tinyurl.com/2tb8nrzm Servo - For three EUR a real improvement: https://tinyurl.com/bdhe68et Tires: https://tinyurl.com/yc6szfh2 TRACK: https://micro-tracks.de Tools needed: Hand drill with mini drills ATTN: https://tinyurl.com/3wdsnxma Small screwdriver: ATTN: https://tinyurl.com/ycxjjwj5 Dremel with mini cutting discs E.g.: https://tinyurl.com/mr2hy6jk (You always need it anyway ;) My favorite velcro tape: https://tinyurl.com/3nds8eau (BEST!) Chapter / Assemblies 00:00 - Intro 01:25 - Test drive Out of the Box 01:47 - Test drive RWD conversion 02:20 - Short overview 03:53 - Unscrew upper deck 05:15 - Unscrew front diff housing 07:47 - Disassemble front CVDs 10:34 - Always be careful! 13:19 - Shorten front diff housing 15:30 - Convert to monoshock 24:26 - Machining lower control arms 27:29 - Lock rear diff 33:57 - Shorten drive shaft 34:57 - Reassemble gearbox 38:00 - Extend servo horn 45:00 - Ball head front linkage 48:56 - Servo assembly and adjustment 52:12 - Electronics installation 56:39 - FIRSTRUN :)