Watch This
  • Trending
  • Explore

Echo to Echo

Two echoes are better than one, right? Of course! There's lots of good resources online for this topic, the best of which (I think) are listed below: https://www.olympus-ims.com/en/applic...    • Video   This one has the math to show how the paint magically disappears, so if that's up your alley or you can't sleep, then enjoy!

Join Today
How to Calibrate a UT Olympus 650 Scope Echo to Echo - Part 3
▶︎

How to Calibrate a UT Olympus 650 Scope Echo to Echo - Part 3

6dB Drop is Not Great for Flaw Length Sizing
▶︎

6dB Drop is Not Great for Flaw Length Sizing

Dual Crystals and the Round Mound of Sound
▶︎

Dual Crystals and the Round Mound of Sound

Dial in Your Angle
▶︎

Dial in Your Angle

AWS D1.1 Shear Wave Inspections
▶︎

AWS D1.1 Shear Wave Inspections

Gating Modes for Corrosion
▶︎

Gating Modes for Corrosion

Spike vs Square Pulser
▶︎

Spike vs Square Pulser

Basic Angle Beam Calibrations
▶︎

Basic Angle Beam Calibrations

Ultrasonic echo to echo thickness measurement thru coatings
▶︎

Ultrasonic echo to echo thickness measurement thru coatings

Twin Peaks - UT Root Signals
▶︎

Twin Peaks - UT Root Signals

Rayleigh Waves
▶︎

Rayleigh Waves

How to identify common defects in A-scan ultrasonic testing. Theory leason
▶︎

How to identify common defects in A-scan ultrasonic testing. Theory leason

How to perform UT thickness calibration using Omniscan SX?
▶︎

How to perform UT thickness calibration using Omniscan SX?

Ultrasonic Thickness on Painted Surfaces
▶︎

Ultrasonic Thickness on Painted Surfaces

Probe Choice for UT Corrosion Scanning
▶︎

Probe Choice for UT Corrosion Scanning

dB Drop for Sizing Crack Height
▶︎

dB Drop for Sizing Crack Height

Basic Tips for Thickness Testing with a Flaw Detector
▶︎

Basic Tips for Thickness Testing with a Flaw Detector

Unbelievable Workers | Working with Talented Engineers #46 #fail #adamrose #smartworkers
▶︎

Unbelievable Workers | Working with Talented Engineers #46 #fail #adamrose #smartworkers

B31.1 vs B31.3 - Scanning & Acceptance Criteria
▶︎

B31.1 vs B31.3 - Scanning & Acceptance Criteria

How to Auto Cal a UT Olympus 650
▶︎

How to Auto Cal a UT Olympus 650

AboutContactPrivacyTerms
Made with ❤️ by Abdo