Wire Straightener for Wire, Tube, Strip and Cable

Novo Precision Wire Straighteners https://www.novoprecision.com/product... Novo offers roll-style straighteners for the really tough straightening requirements. Our roll straighteners can remove cast or helix from round wire as well as flat strip or shaped material, including hex, D-shaped, square, triangular, etc. In many cases even strip “camber” can be controlled. Novo’s precision straighteners can handle wire diameters from a minimum of .006” (0.15 mm) to a maximum of .375” (9.4 mm). Special Features All Novo roll-style straighteners incorporate the following features: Seven or more roll bearings per plane. Standard grade straighteners have as few as three. #1 Precision Strip Straightener #1 PWS 2 Plane Independent adjustments for each roll bearing. Standard grade roll straighteners typically have only some that are adjustable. Low friction 120-degree "V" groove control channel. Standard grade straighteners typically use a harsher 90-degree that can mark round wire. Caliper measurement setup and confirmation. Lesser-grade straighteners use the unreliable “touchy-feely” method which is slow and does not address ISO procedure and documentation requirements. Bearing position locking torque wrench. Always a “free” tool included with each Novo precision straightener purchased. Eliminates stripping of the positioning and bearing screws through over-torqueing. Smaller bearing roll diameters and closest center-to-center positioning. Results in an easier breaking of the wire memory and reacts to fine adjustments more aggressively. Scientific straightening approach with Novo “Quick Set Reference Chart.” Allows for a very quick “zeroing” of the strip straightener and faster setup. Novo Recording Chart. Used to record each wire application setup for future use. It eliminates the need to go through the setup effort on duplicate applications.