Tree Of Life Pendant Tutorial.

Hello and welcome to my latest tutorial. To make this pendant you will need - • 1.5mm wire (14g) 1 x 10” (26cm) • 0.315mm wire (28g) 25 x 7” (18cm) • 0.8mm wire (20g) 1 x 3” (8cm) • Beads, 1 x 8mm, 2 x 3mm For this pendant I recommend you use old cutters or over sized cutters on the bigger wire, also use bail pliers for the curls on the thicker wire too. I use bail pliers, old cutters and bent nose pliers for this pendant. Below is a list of links to all of my standard tools. I no longer put links to tools on here. The tools I use are: • Tronex needle nose pliers • Tronex short round nose pliers • Tronex razor flush cutters • Beadsmith flat nose nylon jaw pliers • Occasionally I use tronex bent nose pliers • Occasionally I use heavy duty wire cutters • Occasionally I use xuron needle nose pliers • Bobeeze bobbins (medium size with no extra weights) How I oxidize my bare copper -    • Oxidising copper jewellery and after care.   Facebook -   / kellyjjewellery   IG jones_kel My Etsy store - (where you can see my tutorials and jewellery for sale) https://www.kellyjjewellery.co.uk Thanks for watching x