Fusion 360 | Slots Within Boundary
Patterning slots within a boundary. Thank you to @KristianLaholm for this solution. Please refer to his video here: • Fusion 360 - Slot Pattern (Parametric, Rec... If you have found this video useful and would like to support me, you can buy me a coffee at https://www.buymeacoffee.com/fusion36... or you can also support me on Patreon at https://www.patreon.com/fusion360scho... Any contribution can go towards improving the quality of the channel. Thank you. #fusion360school #fusion360PatternSlots 0:00 Intro 0:22 Slot Sketch 1:34 Thin extrude and fillet (from top) 4:40 Extrude from side (Recommended solution)
▶︎
Fusion 360 | Case Study 25 (Swept Cut/Ruled Surface)
▶︎
Fusion 360 | Shell, Web and Rib?
▶︎
Fusion 360 | Fade-in Honeycomb Pattern
▶︎
Contact Sets | When To Use Them And When To Avoid Them | #Fusion360
▶︎
Fusion 360 | Slots around holes
▶︎
Best Honeycomb Grid Trick in Fusion360
▶︎
Fusion 360 | Variable Chamfer
▶︎
Design Curvy Parts the Easy Way | Fusion 360 Tutorial
▶︎
Learn Fusion 360 Loft – The Right Way to Create Complex Shapes
▶︎
Fusion 360 for FTC: Creating Points
▶︎
Fusion 360 | Capture Hook
▶︎
Fusion 360 Surface Practice Series – Exercise #2
▶︎
Fusion 360 Hole Command – The Fastest Way to Add Holes, Threads & Countersinks
▶︎
Fusion 360 | Fade-in Recess
▶︎
STOP using FreeCAD WRONG! Do this INSTEAD (Workflow & Tips)
▶︎
Extrude with Offset in Fusion
▶︎
3D Design: How To Design Honeycomb Patterns In Fusion 360
▶︎
12 Fusion Hotkeys Every Beginner Should Learn
▶︎
Fusion 360 | Case Study 19
▶︎