Assembling another Sanni Portable Cartreader (v1.2c)

New! See my github for the latest versions of the PCBs and BOM for this project: https://github.com/makhowastaken/cart... This is the same reader I built last time, just with a cooler looking PCB. The PCB I used is the v1.2c version in 1.6MM FR4 with oshpark's after dark finish. This is my original hardware design using the schematics and software from: https://github.com/sanni/cartreader . I did have to make some concessions to make everything fit properly, including the manual trimming of a lot of components for flush installs. If this thing has to be disassembled, it's going to get messy. Previous hardware revision (v1.1) here:    • I made my own custom Sanni Cart Reader shi...   Previous build here (v1.2):    • Assembling my Smallest Sanni Portable Cart...   Feel free to join the discussion at the r/gameboy discord:   / discord   The "Pro" files are the main shield that the arduino gets soldered to. The "GBA" file is the physical cart reader shield. The wiring and tracks are completely untweaked but I did update the silkscreen to reflect the pins that actually need to be soldered. I'd recommend using the "c" variant if getting an "after dark" PCB from oshpark (black substrate with clear solder mask) otherwise the "b" variant is the exact same. I'd recommend panelizing them yourself like I did in the video but I'll upload panelized versions for building shortly. If you end up building these, please let me know down below or on discord. Thanks. Here are the updated gerbers. Build these at your own risk. Pro 1.2c: https://www.dropbox.com/s/pjptka9x7i5... GBA 1.2a: https://www.dropbox.com/s/bpqte0yuzq0... Flash adapter: removed link because it doesn't work BOM here: https://www.dropbox.com/s/bj3715f2w9b...