Ford Duratec usuwanie ciężkiego Nagaru, który zalepił silnik w kupionym aucie.

Do you have a serious problem with your car? Let us know in the comments; we'd be happy to come and record a video with you. The video shows a serious case where several oil changes with a flush removed the carbon buildup. What could have happened in this car if the engine hadn't been flushed? The new oil poured into the engine wouldn't have been able to remove the lumps of burnt and old oil, which, as you can see in the video, were blocking the oil passages. However, the flush slowly softened the lumps and turned them into liquid oil. The most important thing is that the oil passages were unblocked, the strainer and filter weren't clogged, and the engine is now lubricated. The customer noticed a difference in the engine and now knows to regularly use TEC 2000 oil flush. We invite you to watch and contact us if you'd like to record videos with us. Best regards. #tec2000 #automotive #workshop TEC 2000 Engine Flush should be used during a standard oil change. Add the product to the engine, while still in the old oil. The engine should reach normal operating temperature. After adding the product, let the engine idle for approximately 10-15 minutes. After this time, drain the old oil, install a new filter, and refill with fresh oil. If the engine is experiencing problems such as sticky rings, uneven compression, increased oil consumption, or black smoke, the product should be used for approximately 25-30 minutes before the oil is changed. The unique combination of highly effective detergents and highly efficient lubrication allows the product to be used in all combustion engines – gasoline, diesel, and gas. The operation is completely safe for the engine.