Swisher 44 Inch Finish Mower Belt Replacement - Removal and Installation Detailed

Hope this may help you if you're trying to get your belt replaced on your Swisher finish mower. It's probably the same process for the rough cut mowers as well. Tools: 1/2" (or 13mm) wrench or socket 7/16" wrench or socket 3/8" wrench or socket Tips: 1. You do have to slightly raise the motor to get the old belt out and the new one in. 2. Belt routing diagram near end of video Belt 1/2 x 74" V belt - https://www.amazon.com/dp/B00NX4LZP4 If you need new blades, these are great https://www.amazon.com/dp/B01I4U0FTS Detent Pin to make quick change angle adjustments - https://www.huyett.com/dtp-0375-2625?... 00:00 Overview 01:38 Removing Existing Belt 07:12 Remove Rear Engine Mounting Plate Bolts 09:38 Lift Engine to Create Space to Remove Belt from Drive Pulley 10:16 New Belt Specs 10:50 Install New Belt 13:30 Tensioner Adjustment 14:21 Inspect Safety Kill Switch 16:25 Tip - Quick Change Offset Angle of Mower 17:13 Review of Belt Routing