SCAN MANUAL DTC YARIS BAKPAO! LENGKAP DAN MUDAH! | How to Scan DTC Yaris Manually

This article explains how to manually scan if the check engine indicator is on without using a scanner, using only a cable to identify the problem with the Yaris Bakapo fuel injection system for engine code 1 NZ-FE. Manual DTC code list for Toyota Yaris, Vios, and Limo: 1. Normal Condition 2. Air Flow Meter signal 3. Ignition signal 4. Engine Coolant Temperature Sensor signal 5. Oxygen Sensor 6. RPM signal (Crank Angle Pulse) 7. Throttle Position Sensor signal 8. Intake Air Temperature Sensor signal 9. Vehicle Speed ​​Sensor signal 10. Starter signal 11. Switch signal 11. ECU/ECM 12. Knock Control Sensor signal 12. RPM signal 13. Knock Control CPU (ECM) 13. RPM signal 14. Turbocharger Pressure 15. Ignition signal 21. Oxygen Sensor 22 Engine Coolant Temperature Sensor signal. 23 Intake Air Temperature Sensor signal. 24 Intake Air Temperature Sensor signal. 25 Air-Fuel Ratio Lean. 26 Air-Fuel Ratio Rich. 27 Sub Oxygen Sensor signal. 28 No. 2 Oxygen Sensor signals. 31 Air Flow Meter signal (Vacuum Sensor signal). 32 Air Flow Meter signals. 34 Turbocharger Pressure signal. 35 Turbocharger Pressure Sensor signal. 35 HAC Sensor signal. 41 Throttle Position Sensor signal. 42 Vehicle Speed ​​Sensor signals. 43 Starter signals. 51 Switch signals. 52 Knock Sensor signals. 53 Knock Sensor signal. 54 Inter-cooler ECM signal. 71 EGR System. 72 Fuel Cut Solenoid signal. 78 Fuel Pump Control signals. 81 TCM Communications. 83 TCM Communications. 84 TCM Communications. 85 TCM Communication