Webinar Lauterbach Mixed Signal Probe – Logic Analyzer with Real Time Trace in one tool

An in-depth webinar on the Lauterbach Mixed Signal Probe. Learn how it delivers a single, powerful solution for analyzing both digital and analog signals, and how to seamlessly trace signals and correlate them with code execution throughout development and testing. Agenda: • Demo Setup Hardware & Software: A detailed look at the setup, including utrace/PowerDebug, Nucleo H7S3L8, and the BME680 (I2C source). • Wiring Guide: Step-by-step instructions for correct hardware connections. • Configuration: Learn how to use the CMM file and commands for optimal setup. Live Demo • Power Measurements: Real-time current, voltage, and power measurements of the BME680 sensor. • Analyze I2C Data: • Register Analysis: Observe the interaction between registers (Tx/Rx) and Interrupt Service Routines (ISRs) versus signals on the I2C bus. • Waveform Visualization: Analyze SCL/SDA waveforms on the I2C bus. • Troubleshooting: Identify and correct issues like incorrect pull-up resistor configurations (waveform/signal level analysis). Wrap-up • Broader Applications: Mixed SIgnal Probe usage in other communication protocols & measurements. • Quick Start Guide: A handy cheat sheet for getting started quickly with the Lauterbach Mixed Signal Probe. • Q&A Session: Open forum for questions and discussion. Key Takeaways: A summary of the main learnings from the webinar.