МАСТЕР-КЛАСС «УЗОР «ВОЗДУШНАЯ СЕТКА»

TIMING: 00:00 WEAVING DESCRIPTION 4:47.4. PURE TALK 25:04. WEAVING USEFUL LINKS:    • МАСТЕР-КЛАСС «ОБЪЕМНОЕ КАШПО ПЛЕТЕНИЕМ ДВА...      • МАСТЕР-КЛАСС «УЗОР "СЕТКА».   For those weaving according to my measurements: I have a 12-liter planter. The hole markings are: 3 cm from the top of the pot and 3 cm between the holes. I ended up with 29 holes. I needed 14 6m20cm vines and one 3m20cm vine. (Add a 10 cm allowance to each wicker) If you make 30 holes with the same markings, you will need 15 wickers 6 m x 10 cm long (But just in case, add a 10 cm allowance to each wicker) !!! FORMULA FOR CALCULATING VINE LENGTH!!! Required values:   1) Number of stakes -       ; 2) Post height (from the middle of the hole in the bottom to the middle of the hole on the inside of the bucket -          ; 3) Circumference = Diameter of the circle * 3.14 =       ;  ;  FORMULA:  Weaving surface area = Circumference * Post height =    ; Winding surface area (or one octopus tail) = Weaving surface area / number of stakes / rattan width in cm!!! + 20 cm (for tucking in the tails) + 2 * the length of the dowel on the front side of the mesh (since one part of this dowel will be on the visible side of the weave, and the other will be hidden behind the weave) = ; The length of the dowel for the octopus = 2 times the length of the dowel (which we calculated taking into account the allowance for the tails and decoration) + 2 times the height of the posts + 3 times the distance between the holes.