Marston Rain Coat by Cashmerette Sew Along

Cover up without compromise with the Cashmerette Club Marston Raincoat sewing pattern! Keep dry all season long without squashing your bust, thanks to darts in cup sizes C-H which are included in this fully-lined all-weather coat. Featuring a full-coverage hood with optional brim, double-layer cuffs with cozy knit ribbing, and an internal waist drawstring for shaping, the Marston is an advanced level project you’ll love to sew and wear. Finished with snaps on the zipper flap, patch pockets and back vents, you’ll achieve a professional look, knowing you can rely on Cashmerette for a beautiful fit for your curves. Learn more and get yours at cashmerette.com/marston My fabric: Wazoodle Fabrics: https://wazoodle.com/collections/pros... Seam Tape: https://wazoodle.com/products/seam-se... Time Stamps Note: Seams that can be sealed are marked with (Seal) next to the step. Trim the seam allowances to ¼”/1.2 cm and seal the seam. This is an optional step. 0:00 Intro 0:17 Marston Raincoat Overview 1:05 Materials & Notions 1:27 Optional: Seam Sealing 1:39 Notions 1:51 Stitch & Seam Info 1:56 Notches Seam Sealing info 2:12 Using a Non-Stick Presser Foot 2:56 Seam Sealing Tape 3:25 Seam Sealing Tape Demo 7:53 Interfacing Sewing Begins 8:14 Shell: Sew Darts (Seal) 9:28 Shell: Sew Shoulders (Seal) 9:54 Press Sleeve Hems 10:02 Shell: Ease Sleeves to Armholes (Seal) 10:28 Pin/Clip Sleeve to Armhole 10:51 Sew Sleeves to Armhole (Seal) 11:39 Armhole Sealing Demo 14:36 Shell: Sew Underarm/Side Seam (Seal to Interfacing) 15:10 Shell: Sew Sleeve Hems 15:46 Shell: Assemble Hood (Seal) 16:26 Assemble Brim 16:54 Baste Brim to Hood 17:15 Shell: Sew Hood to Neckline 17:56 Assemble Pockets 18:53 Assemble Pocket Flaps 19:11 Attach Pockets (Seal) 19:52 Attach Pocket Flaps (Seal) 20:40 Shell: Lower Side Seams (Seal) 20:56 Shell: Lower Back Center Seam to Circle (Seal to Notch) 21:21 Shell: Sew Upper to Lower Body 21:54 Lining: Darts 22:12 Lining: Sew Center Back Seam 22:21 Lining: Baste Center Back Pleat 22:40 Lining: Sew Bodice Shoulders 22:54 Lining: Ease Sleeves to Armholes & press 23:50 Lining: Sew Underarm/Side Seam & Press 24:04 Lining: Assemble Hood 24:27 Assemble Hood Facing 24:43 Sew Hood Facing to Hood Lining 25:31 Add interfacing to Drawcord Opening 25:37 Install Grommets, Buttonholes or Eyelets for Drawcord 26:15 Lining: Sew Sides Seams of Lower Body, Press 26:37 Lining: Sew Center Back of Lower Body 26:50 Lining: Sew Upper to Lower Body 27:15 Assemble Hem Facings 27:28 Sew Hem Facings to Lower Linings 28:01 Assemble Neck Facings 28:10 Sew Facing to Lining Body 28:23 Leave Drawcord Opening 29:28 Add a Hanging Loop 30:05 Lining: Attach Hood to Body 30:39 Assemble and Attach Knit Cuffs 31:19 Sew Cuffs to Sleeve Lining 31:41 Shell: Assemble Zipper Flap 31:55 Trim, Clip Curve, Turn and Press Flap 32:30 Shell: Prepare to Sew Zip Flap to Right Front 33:17 Shell: Sew Flap to Right Front 33:50 Trim Seam Close 34:30 Sew Enclosing Cut Edge (Seal) 35:07 Shell: Assemble Zip Facing 35:22 Trim, Clip Curves, Turn and Press 35:32 Shell: Prep to Sew Zipper to Right Front Edge 36:06 Zipper Tips 37:09 Baste Zipper to Right Front 37:50 Mark Matching Seams on Zip Tape 38:08 Pin Zipper to Left Front 38:28 Baste Zipper to Left Front 39:08 Sew Zipper Facing to Left Front 40:06 Sew Outer Shell to Lining along Both Front Edges 41:00 Sew Shell Hood to Lining Hood 41:44 Trim and Turn Coat Ride Side Out 42:09 Prepare to Sew Hood Draw Cord Tunnel 42:40 Mark Stitching Line 1”/2.5 cm Away Front Edge 43:12 Topstitch Along Markings 44:49 Secure Neck Seams Together 45:05 Finish Sleeves 48:06 Optional: Secure Shell to Lining 48:48 Secure Waist Seams Together 49:54 Prepare to Sew Waist Draw Cord Tunnel 50:09 Mark Casing 5/8”/19 mm Above Waist Seam 50:22 Sew Casign along Markings 51:12 Finishing Vent and Hem 51:23 TRIM VENT ACCORDING TO INSTRUCTIONS 51:43 Sew Cut Edges Together & Press 51:59 Stop Sewing 1/2" from top edge, Clip in Lining 52:11 Place Right Side Hem Right Sides Together 52:58 Sew Right Side Hem 53:33 Sew Left Side Vent 53:50 Place Left Side Hem Right Sides Together 55:05 Arrange Vent Opening 55:19 Hand Sew Vent Opening Closed 56:16 Sew Across the Top Vent 56:29 Insert Waist Drawcord 56:59 Add Cord Locks and Secure Ends 57:12 Insert Hood Drawcord 57:36 Add Cord Locks and Secure Ends 58:15 Install Snaps 58:32 Outro