DIY Sequential Shifter for Sim Racing | Full Build Tutorial

In this video, I will show you how to build a DIY sequential shifter for sim racing and PC racing games. In this full tutorial, I show the parts, assembly process, and how it works for a homemade sim racing setup. 🔨*Materials Needed* -Plywood size - Height 18mm, length 11 inches, width 4.5 inches -608 2RS Deep Groove Ball Bearing 8x22x7mm -626ZZ Deep Groove Ball Bearing 6x19x6mm -M6 - 3.5 inch -- 3 Bolts -M6 -- 11 Nuts -M6 -- 10 flat washers -M8 - 1 inch -- 2 Bolts -M8 - 2 Nuts -M8 - 1 flat washer -M10 - 3 Nuts -0.5inch screw - 4 screws -10mm Thread bar - 12 inch -Coil spring -- Outer diameter - 17mm (recommended 15 - 20mm) length - 30mm (recommended 30 - 50mm) Wire diameter - 2mm (recommended 2 - 3mm) -Micro Limit Switch with 10mm Roller Lever - 2 Switches -RJ45 Socket PCB Mount 5921 8P female connector -Universal Aluminium Gear Shift Knob 🔧*Tools I use* -Drill -Jig saw -Polishing Pad Drill Attachment Tool -6mm Drill bit -Jigsaw Blade T 119 B -P120 Sanding Discs Pads -P120 normal sandpaper -Tissue paper -Grease lubricant -Flat screw or wood carving tool PDF Link - https://drive.google.com/drive/folder... Diagram - https://drive.google.com/file/d/1HRes... 👍 Don't forget tolike, subscribe, and hit the notification bell to stay updated on our latest DIY gaming projects and tutorials. #simracing #diyshifter #sequentialshifter