Ariens Snow blower LED Light Installation

Ariens Snow Blower LED Light Installation. In this video I show how I installed a LED light bar on an Ariens snow blower in December 2016 for $33.00 plus the cost of the LED Light. Direct Halogen Light Assembly Replacement from Ariens Part Number: 72104400 = $50.00 + S&H The LED does not flash on and off because a Full-Wave Rectification was incorporated by connecting a capacitor between the positive LED connection and the positive Halogen Blub & AC Generator connection on the rectifier. I have seen much more complicated designs but this works. Same as the OEM Connectors - 2 x $8.00 MSD 884 2-Pin Male and Female Connectors with pins. Rectifier - 1 x $7.00 NTE Electronics NTE53016 Silicon Bridge Rectifier, Full Wave, Single Phase, Low Profile Epoxy Case, 50 Amps Maximum Output Current, 200V Maximum Recurrent Peak Reverse Voltage. $7.00 Capacitor 1 x $2.10 (had to buy a pack of three for $6.20) Radial Electrolytic Capacitor, 2200uF, 16V, 105 C Junction Box 1 x $7.00 ABS Plastic Electrical Project Case Power Junction Box, Project Box 3.29"x3.19"x2.2"(83 x 81 x 56mm) Red and Black wire Terminal Connectors Solder and shrink tubing LED light varies in price based on size and type - Waterproof or self contained is more important than the Lumen value but 4500 - 6000 Kelvins for a whiter looking light.