Master C-More Micro HMI: Build Your First Control Panel Today

We will now put our first program into the C-More Micro HMI Panel using the C-More Micro programming software. The Do-More Designer Simulator will be used with a modified Start-Stop Jog Circuit, so we can use our HMI screen to control both the output and the PLC inputs. The PLC logic for our circuit is in our post: How to Make a Start/Stop/Jog Circuit in a PLC. The YouTube video can be seen here. Our C-More Micro HMI Panel will communicate with the PLC simulator over Ethernet using the Modbus TCP protocol. Let’s get started. More information can be obtained on our Website. This includes all of the links mentioned in this video. https://accautomation.ca/c-more-micro... 00:00 C-More Micro First Program 00:40 Do-More Start Stop Jog Circuit 01:09 Modified Circuit for C-More Micro 01:27 Modbus Addresses in Do-More 02:50 C-More Micro Programming Software - Communication Parameters 04:58 C-More Programming Screen 05:15 C-More Pushbuttons 10:18 C-More Indication Light 12:03 C-More Micro Program Transfer 13:05 Testing the C-More Micro to Do-More Program Previously, we have discussed the following in our C-More Micro HMI Panel: System Hardware http://accautomation.ca/c-more-micro-... Unboxing and Review Video    • C-More Micro HMI Hardware Unboxing and Review   Installing the Software http://accautomation.ca/c-more-micro-... Installing the Software Video    • C-More Micro HMI Programming Tool Download...   Update Automation Direct Software C More Micro Software Video    • Update Automation Direct Software C-More M...   System Setup Screens http://accautomation.ca/c-more-micro-... System Setup Screens Video    • C-More Micro HMI System Setup Screens   There are several reasons that we are using the EA3-T4CL C-More Micro Panel. Here are a few: • Touch screen display • Free downloadable programming software • 482 x 272-pixel display (WQVGA) with up to 40 lines by 80 characters of text and graphics • 32K colors • 14MB memory • Built-in USB type Micro-B programming port • Built-in RJ45 Ethernet Port • Built-in 15-pin serial communications port • Built-in RJ12 serial communications port • Built-in Alarm Control setup that activates beep, back-light flash, customized alarm banner, and red LED blinking • 0 to 50 °C (32 to 122 °F) operating temperature range (IEC 60068-2-14) • NEMA 4/4X, IP65 compliant when mounted correctly, indoor use only • UL, cUL & CE agency approvals • 2-year warranty from date of purchase http://www.accautomation.ca