Lexus IS300 Brembo 17z 6-Piston Porsche Audi Brake Calipers

Fitting the Brembo 17z brake calipers onto Lexus IS300 I found recently at a local junkyard for the $80 (front). These will fit IS300 using overkill engineering custom brackets. They require 2012+ GS350 F-Sport 14.1" rotors and rear IS-F/RC-F rotors. I used Autosports Engineering 30mm Roll Center Adjusters:    • Installing Lexus IS300 Roll Center Adjuste...   For grinding, recommend getting a 9” disk. The 4-1/2” I used worked at first but got too worn out and hard to reach for rotor clearancing. For grinder control, definitely recommend a foot pedal to control speed, I've used a Foredom brand foot pedal since the 1990s (nail salon days) for my Dremel and grinders. For safety, I used this faceshield when grinding. Dewalt 9" Disk - https://amzn.to/36b5Pn1 120V Foot-pedal - https://amzn.to/36ceohq Faceshield Protector - https://amzn.to/369I1QH The calipers should say 17ZL and 17ZR (Parts stores/Rock Auto show these as the rotor 330mm) Part numbers on edge: 20.8432.06 and 20.8432.05 I used 2013-2018 GS350 F-sport rotor-Centric 121.44204 and 121.44205 (not to be confused to GS-F or IS-F) For the rear you need IS-F drilled or GS-F slotted rotors, I ordered some DYNAMIC FRICTION 600-75040D and 600-75039D rotors because they were only RC-F/GS-F solid blanks available to match the F-sport solids. All others are OE still with the slots or drilled for IS-F. Hardware I ordered from BelMetric (shipping was $9.25): Front: 4 x BSH12X1.75.30 - Allen Socket Head (BSH12X30) = $2.72 4 x BSH16X1.5X40 - Allen Head 12.9 Black (BSH16X1.5X40) = $6.88 4 x WL12CLZ - Lock Washer Zinc (WL12CLZ) = $0.56 4 x WL16MECLZ - Lock Washer Mechanical Zinc (WL16MECLZ) = $1.04 8 x WFHV16CLZ - Hardened Flat Washer Zinc (WFHV16CLZ) = $3.60 Rear: 4 x BSH14X1.5X30 - Allen Head 12.9 Black (BSH14X1.5X30) = $6.96 4 x BSH12X1.7525 - Allen Socket Head (BSH12X25) = $2.52 4 x WL12CLZ - Lock Washer Zinc (WL12CLZ) = $0.56 4 x WL14CLZ - Lock Washer Zinc (WL14CLZ) = $1.00 More info can be found at Overkill Engineering's site: http://5thgencelica.com/ Subscribe and follow me on future episodes for fitting them onto the car. Junkyard Video:    • Junkyard Brembo 6-Piston 17z Calipers for ...   Caliper Cleaning Video:    • Refurbishing Brembo 6-pot 17z/18z Brake Ca...   ------------------------- Support the Patreon:   / tunerwithkids   Merch Available: https://teespring.com/stores/tuner-wi... Follow Me on IG:   / tuner_with_kids   For questions and inquiries: [email protected] ------------------------- #brembo #Lexus #IS300 0:00 Intro 1:23 Spindle/Dust Shield Removal 3:33 Parts Needed for Calipers 5:27 Fitting Overkill Engineering Brackets 7:20 Test Fitting Caliper 10:30 Grinding Caliper to Fit 16:25 Fitted with Rotor 16:55 Wheel Clearances 17:55 Dust Shield Trimming Disclaimer: "Tuner with Kids", the alias for the human content creator for this YouTube channel, is not responsible for any damages, injuries, losses, or liabilities associated with any repairs, upgrades, or maintenance performed on yours, or any elses, vehicle/property whatsoever. No warranty, express or implied, is made as to the accuracy or completeness of any information provided within this channel. Viewing and using the “as-is" information of this channel is totally at your own risk. Always wear personal protection equipment and follow appropriate vehicle manufacturer service manual guidelines with original manufacturer parts only when performing any repairs, upgrades, or maintenance upon any vehicle/property. Please note that some of the links provided are affiliate links and I may earn a commission if you purchase through the links. I use all of the products shown and recommend them because they are from companies I have found to be helpful and trustworthy. Please let me know via email if you have questions regarding any of the products/tools used.