How to Replace Lower Engine Torque Strut Mount 2007-2014 Ford Edge

Shop TRQ on 1AAuto.com Engine Torque Strut Mount https://trq.video/ia-1AEMT00460 Shop TRQ on eBay Engine Torque Strut Mount https://www.ebay.com/itm/353706343573... Shop TRQ on Amazon Engine Torque Strut Mount https://www.amazon.com/dp/B09HQZCCRW Shop TRQ on Walmart Engine Torque Strut Mount https://www.walmart.com/ip/TRQYouTube... This video shows you how to install a new lower engine torque strut mount from TRQ on your 2007-2014 Ford Edge. The torque strut engine mount braces the engine against twisting, shaking, and vibrating when under load, and when load changes suddenly. The rubber bushings on the torque strut mount will wear down over time, and need to be replaced, even if the strut itself is in good condition. You'll know it's time to replace the torque strut engine mount when you feel vibration or shaking, especially when accelerating. Estimated installation time for a professional technician is approximately: 1 hour 0 minutes This repair was done on a 2010 Ford Edge Limited 3.5L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles: 2007 Ford Edge 2008 Ford Edge 2009 Ford Edge 2010 Ford Edge 2011 Ford Edge 2012 Ford Edge 2013 Ford Edge 2014 Ford Edge Tools you will need: • Pry Bar https://trq.video/oaKe-1AXAA00020 • 10mm Wrench • 15mm Wrench • 10mm Socket • 15mm Socket • Ratchet • Torque Wrench https://trq.video/ocrC-1AXAA00044 • Brake Parts Cleaner • Gloves https://trq.video/odrC-1AXSS00048 • Liquid Thread Locker • Safety Glasses • Drain Pan • Pole Jack • Wire Brush https://trq.video/oPe-1AXAA00079 Subscribe:    / @trq   📱 Download the TRQ Auto Repair App for more videos, torque specifications, and car repair information: https://trq.video/appdownloadyt ⚠ DISCLAIMER: While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.