War Thunder: The Centurion Mk 3 is Meh

=Opinion= The Centurion Mk 3 is very similar to the Centurion Mk 1 just with an increased cannon size and a 2 plane stabiliser, whilst these do increase its performance its (BR) going from 6.0 to 7.7 feels a bit extreme. =Information= The Centurion Mk 3 is a medium tank equipped with a 84mm cannon, a (coaxial) 7.62mm machine gun. The Centurion Mk 3 has a crew of 4, 3 in the turret and 1 in the hull. The Centurion Mk 3 84mm cannon has access to 3 types of round: • (HE) which has 18.8mm of penetration at 100m • (APCBC) which has 236mm of penetration at 100m • (APDS) which has 381mm of penetration at 100m The Centurion Mk 3 is equipped with smoke grenade launchers which are mounted on the turret sides housing 12 smoke grenades 6 are fired per use. The Centurion Mk 3 also has access to smoke rounds. The Centurion Mk 3 is equipped with a ready rack which hold 8 rounds with 4 rounds below the gunner and 4 on the left of the turret this gives it a reload time of 8.19 seconds. The ready rack takes roughly 11 seconds to reload a single round, when the ready rack is completely empty the reload time is increased to roughly 10 seconds. The Centurion Mk 3 has a maximum speed of 35km/h (RB) and a reverse speed of 11.9km/h (RB). Whilst the Centurion Mk 3 is slower than most tanks at (BR) 7.7 it does have the benefit of having a two plane stabiliser which means you never have to stop moving. The Centurion Mk 3 has a maximum armour thickness of 152mm and a minimum thickness of 5mm. The turret front of the Centurion Mk 3 is 152mm thick with the turret sides and rear being 89mm thick, the hull front of the Centurion Mk 3 is 76.2mm thick and has a large lower front plate which is easy to shoot through. Key: (BR) = Battle Rating (Coaxial) = The machine gun that is mounted parallel to the main gun (HE) = High Explosive (APCBC) = Armour-Piercing, Capped, Ballistic Capped (APDS) = Armour-Piercing Discarding Sabot (RB) = Realistic Battles