CSWA Practice Problem 2.3 Solution | SolidWorks Exam Guide

In this video, we'll be tackling Question 2.3 (section 2 - question 3) from the CSWA practice problem set. ==UPDATE== (2026-05-09) As mentioned by @saurabhokayy, the root cause of the discrepancy in the final result is the issue with the rounded dimensions used in this question. If you look closely at the numbers provided, you can see the value of 23.33 mm. However, if we use the actual value from the parametric form of the question, which is (210/9 = 23.33333) mm, we can obtain the correct result. Unfortunately, this is one of those cases where the author rounded the parameters shown in the question but did not update the final answer accordingly. Thanks to @saurabhokayy, we now understand the root cause of the discrepancy. ========== These questions are specifically designed to help you prepare for the CSWA certification exam. You can access the complete set of practice questions through the link provided below: 👉 https://www.solidworks.com/media/cswa... If you find this video helpful, don’t forget to like, subscribe, and hit the notification bell so you never miss an update on SolidWorks tips and exam prep! If you have any questions or need further clarification, feel free to drop a comment below. #solidworkstips #CSWAExam #CADTutorial #SolidWorksTraining #LearnCAD #3DModeling #SolidWorksCertification #EngineeringDesign #CSWAPractice #CADSkills #cswa