How to Replace Parking Brake Shoes 07-10 Hyundai Elantra

Shop for New Auto Parts at 1AAuto.com https://1aau.to/c-254-s In the video, 1A Auto shows how to remove and replace rusty, worn or seized brake shoes and hardware. The video is applicable to the 07, 08, 09, 10, Hyundai Elantra This repair was done on a 2007 Hyundai Elantra and the process should be similar on the following vehicles: 2007 Hyundai Elantra 2008 Hyundai Elantra 2009 Hyundai Elantra 2010 Hyundai Elantra 2011 Hyundai Elantra 2012 Hyundai Elantra 🔧 List of tools used: • Flat Blade Screwdriver • Impact Screwdriver • Pry Bar https://1aau.to/okY-1AXAA00020 • 17mm Wrench • 10mm Socket • 14mm Socket • 17mm Socket • 21mm Socket • Acetylene torch • Blowtorch • Side Cutters • 1/2 Inch Breaker Bar • Ratchet • Socket Extensions • Torque Wrench https://1aau.to/oyz-1AXAA00044 • Anti-Seize Grease • Brake Grease • Rust Penetrant • Floor Jack • Hammer • Jack Stands • Wire Brush https://1aau.to/oes-1AXAA00079 Subscribe:    / @1aauto   Check out our playlist: Hyundai Elantra 2007-2010 4th Gen:    • Hyundai Elantra 2007-2010 4th Gen   📱 Download the 1A Auto Repair App for more videos, torque specifications, and car repair information: https://1aau.to/appdownloadyt 🚗 For More Info visit us at https://1aau.to/h-bHT ⚠ DISCLAIMER: While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.