The FASTEST Way to Export Stems on MPC Sample 🔥 #logicpro #mpcsample #shorts

Quickest way to export your stems. First match a BPM.(...) Also make sure you have the USB-C cord plugged in. I'm gonna make a quick beat. (...) All right. (...) All right. Now, so the trick here is that you want to go to your sequence. Since it's a two bar loop, what you want to do is hold down shift while twisting the K1 knob and then change it to three. If it's a four bar loop, change it to five and etc. Let's go back. I'm going to hit the mute button and then I'm just going to start with the kicks. I'm going to make sure this is off and then I'm going to count in. I'm going to press record two, three, four. (...) After third bar, you switch and then you don't want to stop while you're recording. (...) All right. Third bar, you switch again. (...) Third bar, switch. (...) And that's it. You press stop. You're going to look for the very first sound as close as you can to it. Make sure it's on one. Once everything is on one. I use the scissors while holding down the option button and then it makes my cuts for me automatically.(...) Every three bars. Command A. Make a cut at the third bar. You can press L for loop. And now you have your beat. (...) Already a lot of everything you can make. You turn into song mode.(...) You know, you do what you need to do. (...) Make your cuts.(...) Now you have a visual of your song mode.