👈🥇 QUITAR RETROVISOR PEUGEOT 207 🚙 - Tutorial completo

You might also like this video 👉    • 🟦 Cómo COLOCAR 🦜PARROT 🦜manos libres en PE...   SIMPLE EXPLANATION 🚗 ... 🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗🚗 STEPS TO FOLLOW: 1️⃣ We release the PANEL from the inside of the door. It has three screws (Torx 20). One on the inside edge of the door, one on the outside edge, and one on the door handle, where the button panel is. 2️⃣ After removing the screw from the handle, we'll remove the button panel using a flat tool, taking care not to tear off the connector. We'll release it by pressing on the pins on the sides. 3️⃣ We remove the door panel by pulling it from the bottom. First, pull it toward us and then upwards... But be careful! Do this carefully because you can accidentally tear off the handle pull, which is anchored to the panel from the back. 4️⃣ To release the handle pull, we'll use a flat-blade screwdriver to pry the cable free of the clip and pull up on the small metal cylinder to remove it. 5️⃣ Once we have the door panel removed, we release the two connectors located in the center of the door, one black and the other red-orange. They'll be easy to release by pressing on the pins on the sides with your fingers or a flat-blade screwdriver. 6️⃣ These two connectors are connected by a single thick cable. We follow the path of the cable and release it from the clips that hold it to the metal of the door. Once loose, we insert it inside the metal of the door because we'll later pull it out from the outside of the car door. 7️⃣ We now stand on the outside of the door, at the height of the rearview mirror. We pull the rearview mirror inward and, using a flat-blade screwdriver or plastic lever, we release the black plastic trim underneath the mirror. We can now see the single screw (13 hex) holding the mirror in place. We unscrew it and the mirror is now free. 8️⃣ Finally, we carefully pull the rearview mirror, trying to pull the cable out through the hole in the door. It's the cable we released earlier. Be careful! At the end of the cable, we have the two connectors, and we don't want them to break during this process. ____________________________________________________________________ Do you need any PEUGEOT 207 parts? Contact us. PEUGEOT 207 for scrapping 👉    • 👈🥇PEUGEOT 207🚙  para 💥DESGUACE💥   207 rearview mirror removal in fast-forward: 👉    • 👈🥇 QUITAR RETROVISOR PEUGEOT 207 - DIY. ⌛[...   What is RECHECAR?:    • ★ ¿ QUÉ ES RECHECAR ? ★ Despiece de COCHES...   🚘 Website 👉🏾 https://rechecar.com 🚘 Instagram:   / rechecar   🚘 Facebook:   / rechecar.car   🚘 Twitter:   / rechecar   🚘 Contact email: [email protected] Phone: 665701327